| Skid Plate |
Full width Hi-Tensile steel complete with removable Kingpin & galvanized front apron plate. |
| Sub Frame |
Heavy-duty enclosed floor frame utilizing galvanized crossmembers and incorporating side pressing for additional rigidity. |
| Front Wall |
Fiberglass composite panel incorporating 100mm polyurethane foam core with provision for refrigeration unit of your choice. |
| Side Wall |
Fiberglass composite panels incorporating 25mm polyurethane foam core, reinforced with fiberglass pultrusions. |
| Roof |
Fiberglass composite panels incorporating 85mm polyurethane foam core, reinforced with fiberglass ribs. |
| Rear Doors |
Full width double, 85mm thick polyurethane core in fibreglass reinforced ply door complete with onepiece door seal, five heavy-duty hinges and two anti racking cam locks per door. |
| Rear Frame |
Galvanized, painted steel with option of stainless steel. |
| Flooring |
High profile airflow floor glued and screwed directly into cross member with 100mm Polyurethane foam between crossmembers. |
| Landing Legs |
2 speed single side winding with rocker or air compensating feet. |
| Suspension And Axles |
Clients preferred choice of suspension and axles, tandem, triaxle, airbag or spring. |
| Wheels And Tyres |
Clients choice of tyres mounted to spider rims or disc wheels, aluminum or steel. |
| Hub Odometer |
Fitted as standard. |
| Brakes |
Air actuated spring brakes to ADR 38/02. |
| External Rub Rails |
Incorporated in Peki’s exclusive Aluminum extrusion system with recessed clearance lights and rounded corner posts for increased aerodynamics. |
| Internal Scuff Bands |
Full length fibreglass 300mm high. |
| Electrical |
12 or 24 volt with a seven-pin plug, seal electrical looms and multi-volt LED lighting. |
| Internal Lighting |
4 recessed equally spaced with illuminated switch on front wall. |
| External Lighting |
To comply with ADR 13. |
| Wheel Carrier |
Dual free swinging zinc-plated with safety chains and wheel clamps. |
| Mud Guards |
Polished flat aluminum plate pressing with rubber flaps fitted to front and rear of suspension. |
| Bumper |
Heavy duty galvanized under run bumper fitted with a small step. |
| Reflective Tape |
Full-length reflective tape fitted down each side. |
| Stone Protection |
Aluminum chequer plate to landing legs, toolboxes and lockers. |
| Refrigeration Unit |
To customer specifications. |
| Bulk Head |
Return air bulkhead, mesh or fibreglass for optimum refrigeration performance. |
| Load Line |
Full-length red load line fitted down each sidewall inside van. |
| Optional Extras: |
Side door (pallet size) |
|
Aluminium water tank |
|
Toolbox, lockable with stainless steel lock |
|
Loadlok, track and shoring |
|
Double loading capabilities |
|
Insulated Todco Roller Shutter doors |
|
Stainless steel door harware |
|
Airbag suspension with lifting and steering axles |
|
Meat rails longitudinal, swing down or cross rails |
|
Raise & Lower valves & weight gauges for Airbag suspension |
|
Multi temperature centre divider wall system |
|
Multi temperature sliding bulkhead system incorporating latest gas strut lifting technology |
|
Dry/insulated jumbo belly lockers |
|
Galvanized steel, aluminium, Kemlite scuff bands |
|
Provision for a refrigeration unit |
|
Heavy duty flat or knurled fibreglass, aluminium floors |
|
Tailgates |
|
Walk up ramp |
